Chapter 5 Finishing; Staple - Kyocera KM-C830D User Manual

Staple

User Guide
5 Finishing
This chapter describes the use of finishing equipment. The Finishing tab is available
for models that support optional finishing devices such as Multi finisher or Booklet
stitcher.
Note: For some features in the Finishing tab, the
feature is unavailable. Place the pointer over the symbol for a message that tells how
to activate the feature in the driver.
• Staple binds multiple document pages together with one or more staples.
• Punch places round hole punches in the margin.
• Separation physically separates document copies or multiple copies of a print
job in the finishing tray.
The Staple feature is available on printing systems with an optional finishing device
installed. If a Booklet stitcher is installed, the Booklet printing feature is available. For
further details, refer to
After installation, optional equipment must be selected in the printer driver in the
Device Settings tab. For further details, refer to
page 2-1.
Note: Staple and Separation features cannot be used simultaneously.
Booklet on page 4-1.
symbol is displayed when the
Installing Optional Devices on
5-1