Kyocera KM-C830D User Manual page 116

Gutter
Gutter
down text and graphics. This supports stapling and hole punching. When used with Duplex
printing, the enlarged blank space lines up evenly on both sides of the sheet. The larger blank
space is created by shifting the printable area to the right or down as much as one inch (25.4
mm).
H
Halftone screen
user can adjust Halftone screen settings to create shades of gray in graphic images. Larger
dots spaced close together create darker shades, and smaller dots spaced farther apart cre-
ate lighter shades. Shading can be varied by adjusting the number of rows of dots, the angle
at which rows of dots are placed, and the shape of the dots.
J
Job accounting
printed by each account ID. Account IDs can be assigned at the printing system and stored
in the driver. Once account IDs are assigned, use Job accounting to print in the Copy Man-
agement mode.
Job storage
permanently on the printing system's optional Hard disk: they are not deleted when the print-
ing system is powered off. Job Storage offers a secure print option using a four-digit Access
code. Secure print jobs cannot be printed until requested, using the Access code, at the print-
ing system's operation panel.
KM-NET
Kyocera image refinement (KIR)
vector graphics.
M
Mailbox
tional device such as a Sorter stacker, Document finisher, or Mailbox is installed. Compare
with Virtual Mailbox.
Manual duplex
does not support a duplex unit. After the first half of the print job has been printed, the job can
be flipped over and fed from the cassette for the second side printing.
Monochrome
color settings are constrained.
MP tray
dia.
O
Offset jobs
ture requires an optional finishing device such as a Booklet stitcher or Multi finisher.
Operation panel
to set options such as media type and RAM disk size, and to print jobs stored on the optional
Hard disk.
P
PDL
printing system how to print a document. Availability of some printing options depends on the
selected PDL. Available page description languages are PCL XL, PCL 5e (monochrome
models only), PCL 5c (color models only), and KPDL.
Glossary-2
Blank space on the left side or top of a printed page that can be increased by scaling
Imaging process that breaks down an image into dots. An experienced
An accounting system that records and controls the number of pages
Job feature that saves print jobs for printing at a later time. Jobs are stored
Software that provides network-wide management of printers and copiers.
Print job destination option that distributes print jobs to output trays when an op-
Method for printing on both sides of a sheet when the printing system
Imaging mode that uses black toner only. When used with color models, all
Source tray used for labels, transparencies, envelopes, and custom printing me-
Finishing mode that physically shifts each print job in the output tray. This fea-
The keys and display on the printing system. Use the Operation panel
Page Description Language. This is the language used by your computer to tell the
Imaging feature that smooths the edges of text and
KX Driver