Kyocera KM-C830D User Manual page 117

Permanent job storage
Hard disk. Jobs stored on the Hard disk can only be removed by manual deletion, so are pro-
tected from being erased when the printing system is powered off or reset. For some models,
a barcode can be printed on a Permanent print job.
Poster
by the printer so the cumulative sheets can be assembled as a poster. Use this feature to
print a document in a large, eye-catching poster format, up to 25 times larger than the original
document size.
PRESCRIBE
specified locations in a print job. See also Prologue/Epilogue.
Private print
digit Access code and stores them in RAM disk memory or an optional Hard disk. The job is
printed out at the operation panel by using the Access code.
Profile
select a profile by name and apply its settings to a print job without selecting each feature
individually.
Prologue/Epilogue
cations in the print job. An advanced user may choose to use this feature to embed a PRE-
SCRIBE command that will call a macro to overlay PRESCRIBE form data or a graphic
object, such as a logo or a signature, at a specific point in the print job.
Proof and hold
remaining copies in RAM disk memory or an optional Hard disk. Once the first copy has been
reviewed, the remaining copies can be printed or deleted at the printing system's operation
panel. Proof and hold jobs are stored temporarily and are deleted when the printing system
is reset or powered off.
Q
Quick copy
system's optional Hard disk temporarily for later access. The stored Quick copy jobs can be
accessed from the printing system's operation panel.
R
RAM disk
memory as a virtual hard disk for faster printing. RAM disk is not an attached device, but an
allocation of existing printing system memory. RAM disk is temporary. All data sent to RAM
disk memory will be lost when the printing system is reset or the power is turned off.
Resolution
of detailed printed images.
Reverse page order
page to the first. This option is unavailable when Printer default is selected.
Rotate copies
stacks them in a collated, multi-copy print job. The final stack clearly distinguishes each copy
horizontally and vertically. For restrictions see
S
Separation
copy is clearly distinguished from another. Separation options include Offset jobs and Rotate
copies.
Glossary
Job storage stores print jobs in the printing system's optional
Layout feature for printing a document in a larger size than the maximum supported
Kyocera's scripting language that you can use to embed commands into
Job feature that sends secure print jobs to the printing system with a four-
A set of user defined driver settings that you save as a group. Once saved, you can
Advanced feature that allows you to insert a macro into specific lo-
Job feature that prints one copy of a multiple copy job and then stores the
Job feature that prints all copies of a job, then saves the job on the printing
Printing system memory that lets you set up an area within the printing system
The number of dots printed in one inch. Higher resolution improves the quality
Print output option that sends to a print job destination from the last
Finishing mode that draws every other copy from a separate tray and
Finishing option that stacks print jobs in an output tray so that one print job or
chapter.
Finishing
Separation
Glossary-3