Advertisement
Quick Links
π
H-3421
MISTING FAN
1.
Place empty tank in the approximate location to be
operated.
NOTE: Carrying a full tank of water is difficult.
When full the tank weighs approximately 80 lbs.
2. Fill water tank.
3. Place the fan/pump enclosure on the 10 gallon
water tank. (See Figure 1)
4. Make sure intake line and filter are on bottom of
water tank.
CAUTION! Always operate the misting fan on a
level surface. The fan can become top heavy
when most of the water is removed from the
tank. Keep a minimum of two gallons of water
in the water tank at all times.
TEST GFCI SAFETy PluG
The GFCI safety plug provides protection from electric
shock by examining the fan's electrical curcuit for
current leakage. It must be tested before each use to
assure safe operation.
1.
Plug the GFCI safety plug into a 120 VAC 60 Hz
grounded outlet. The indicator will show if power is
available.
2. Press the test button. The indicator will turn off.
3. Press reset button. If GFCI resets, the fan is ready to
be used.
PAGE 1 OF 2
1-800-295-5510
uline.com
SET UP
Figure 1
GFCI
Safety Plug
Fan/Pump
Enclosure
Intake line
Filter
10 Gallon
Water Tank
0414 IH-3421
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for U-Line H-3421
Summary of Contents for U-Line H-3421
- Page 1 π H-3421 1-800-295-5510 uline.com MISTING FAN SET UP Place empty tank in the approximate location to be Figure 1 operated. NOTE: Carrying a full tank of water is difficult. When full the tank weighs approximately 80 lbs. Fan/Pump 2. Fill water tank.
- Page 2 OPERATION Fill the water tank with clean fresh water before 5. Drain unused water at the end of each use period. every use. (Ice may be added.) NOTE: The misting hub located in the center 2. Aim mister downwind for best results. If more than of the fan is equipped with four nozzles.
Need help?
Do you have a question about the H-3421 and is the answer not in the manual?
Questions and answers