Kyocera Neo User Manual page 13

The phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent
accidental key presses.
Camera lens.
1.
key raises or lowers ringer volume.
2. Volume
key activates Camera mode. To activate camera mode, press
3. Camera
and hold the
Camera
External screen displays time, caller ID, signal, and battery strength.
4.
Lightpipe LED.
5.
Jack for microUSB cable (sold separately).
6.
Jack for a hands-free headset (sold separately).
7.
Warning: Inserting an accessory into the incorrect jack will
damage the phone.
Lightpipe LED Behavior
Your phone's lightpipe LED displays different patterns depending upon the alert. You can disable the
lightpipe LED, see "Set LightPipe Behavior" on page 62.
New message One flash. If you do not respond, your phone will flash again to remind you.
Incoming call Heartbeat pulse. It will continue until you answer the phone or miss the call.
Missed call One flash. If you do not respond, your phone will flash again to remind you.
In call Wave pulse. It will continue until the call ends.
Alarm Three flashes. It will continue until you respond to the alert.
Scheduler Three flashes. It will continue until you respond to the alert.
One flash. It will continue until you respond to Bluetooth request.
Bluetooth
One flash. It will continue until you charge the phone.
Low battery
Charging Wave pulse. Displays when the phone is being charged.
Note: Incoming emergency calls always activate the LED, even if you have disabled it.
User Guide
key.
13