Voice Answer - Kyocera Neo User Manual

Enable Automatic Add
You can set the phone to automatically add a
contact to your voice dial list when you create a
new contact. Select
Menu
>
Features Automatic Add
Set Expert Mode
When expert mode is used, instead of speaking a
command following the initial voice prompts, you
can speak the command after you hear a tone.
Select
>
Menu Settings
and one of the following:
Expert Mode
sets phone to default voice prompts.
• Normal
sets phone to sound tones instead of
• Expert
voice prompts.
Set Display Results
You can set the phone to display up to three
recognition contacts when calling or searching
for a contact with voice commands. Select
> >
Menu Settings Voice Features
>
Display Results Single Best
Set Digit Lengths
You can set the number of digits used for a phone
number in your voice dial list. Select
>
Settings Voice Features
one of the following:
allows 7, 10, and
• North American
1 + 10 digits in a phone number.
allows 4-14 digits in a
• Permit All
phone number.
66
> >
Settings Voice
> .
Enabled
> >
Voice Features
>
or .
Three Best
>
Menu
> and
Digit Lengths

Voice Answer

Enable Voice Answer
You can set your phone to answer a call with your
voice when using a headset.
Disable the Auto-Answer feature, see "Enable
1.
Auto-Answer" on page 67.
Set the phone to normal sounds, see "Set
2.
Ringer Mode" on page 59.
Set the phone to play sound from
3.
the headset, see "Set Headset Sounds" on
page 67.
Select >
4. Menu Settings
>
Voice Answer
Use Voice Answer
When you receive an incoming call, the phone
prompts you with a voice recording. If the caller
is recognized as a contact entry in your phone,
then the phone prompts "Incoming call from
(Name), answer?" Do one of the following:
Say "Yes" or press any except the
•
answer the call.
Say "No" or press the
•
the call.
Remain silent. The voice alert repeats twice
•
and the phone rings once, then returns to the
home screen.
>
Voice Features
.
With Accessory
key to
End
key to ignore
End
Voice Features
>