Hold Call - Kyocera Neo User Manual

Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a speed
dial location assigned to a contact.
To turn on 1-touch dialing:
Select >
Menu Settings
>
1-Touch Dialing Enabled

Hold Call

Enable Hold Call
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
Note: The Hold Call feature will not work if the
Open to Answer feature is enabled. See "Enable
Open to Answer" on page 65.
Select >
1. Menu Settings
>
Hold Call Enabled
If you have not recorded a hold message, you
will be prompted to record one, such as
"Please hold. I'll answer in a minute."
Record the message twice, as prompted.
2.
Select to save the message or
3. Save
and one of the following:
to replay your message.
– Play
to record your
– Re-Record
message again.
to exit.
– Exit
The next time a call comes in, you will have the
option of placing it on hold.
64
> >
Convenience
.
> >
Convenience
.
Options
Place a Call on Hold
You can place a call on hold once you have
enabled this feature.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. It will go to voicemail.
When a call comes in, do the following:
Select
>
1. Options
be placed on hold and will hear your
recorded hold message.
Select to speak to the caller on hold
2. Answer
or to hang up without speaking.
End Call
Change Hold Call Message
Select >
1. Menu Settings
>
Hold Call Re-Record Msg
Record the message twice, as prompted.
2.
Select to save the message or
3. Save
and one of the following:
to replay your message.
– Play
to record your
– Re-Record
message again.
to exit.
– Exit
. The caller will
Hold Call
>
Convenience
.
Options
Convenience
>