Wesco WS3113K Original Instructions Manual page 6

How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account
of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not
actually doing the job. This may significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Front assistant handle
Flexible shaft
40pcs accessories:
Grinding point (shank 2.95mm)
Sanding rubber (shank 3.10mm)
Diamond grinding point (shank 3.10mm)
Cutting disc fixture (shank 3.10mm)
Screw drill (shank 3.10mm)
Sanding sleeve
Sanding paper
Cutting disc
Wool polishing wheel
Grinding stone
Collet (3.2mm, 2.3mm)
Hss drill bit (3.2mm, 2.3mm)
Spanner
We recommend that you purchase your accessories listed in the above list from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store personnel can assist you and offer advice.
6
1
1
10
1
2
1
1
4
3
8
4
1
2
2
1
EN