Kuppersbusch KCT906.2 Installation Instructions Manual
Kuppersbusch KCT906.2 Installation Instructions Manual

Kuppersbusch KCT906.2 Installation Instructions Manual

Kuppersbusch kct906.2: install guide
Hide thumbs Also See for KCT906.2:

Advertisement

Quick Links

Installation instructions

Important - Save for the local electrical inspector's use.
KC 906.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KCT906.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kuppersbusch KCT906.2

  • Page 1: Installation Instructions

    Installation instructions Important - Save for the local electrical inspector’s use. KC 906.2...
  • Page 2: Table Of Contents

    For your information... Be sure to read the information in this manual carefully before you install the cook top. Please keep this manual in a safe place and pass it on to future owners for their information and safety. The following symbols are used in this operating manual: The warning triangle will alert you about possible health risks or things that can cause potential damage to your appliance.
  • Page 3: Safety Instructions

    To eliminate the risk of burns or fire by reaching above heated surface units, do not put cabinet storage space above the surface units. If you do decide to put cabinet storage above the surface units, install a range hood that projects at least 5" horizontally beyond the bottom of the cabinets.
  • Page 4: Installation Above The Oven Eeb 9600.0

    EEB 9600.0 The oven must be positioned on a secured shelf be- tween two cabinets. Shelves (approximately 19mm/ 9/16" thick) must be attached to the adjacent cabi- nets on both sides so the oven can be clipped in at the sides. Please review the installation instructions for the model EEB 9600 for installation dimensions and in- stallation.
  • Page 5: Installing The Cooking Center

    – Using 4.2 x16 mm screws, install the supporting rails in horizontal position on the right side. Install the supporting rails on the left onto the sides of the cabinets, using the following measurements. – Connect the conduit to the conduit box. –...
  • Page 6: Installing The Acc. No. 439

    Installing the acc. no. 439 – Screw on the supporting rails. Adapt the pot grid width, if necessary: IIf the slide-out grid doesn’t fit into the corner because it’s too wide or if there’s too much space after it’s been inserted, the slide-out grid width can be adjusted up to a max.
  • Page 7: Installing The Acc. No. 442

    Installing the acc. no. 442 Install this accessory only with a stainless steel filler panel (acc.no 454)! The installation instructions will be provided with the filler panel. – First, install the stainless steel filler panel (acc. no. 454). – Mark the screw positions for the cabinet floor and the door hinges. A must be the same height as B.
  • Page 8 ÜPPERSBUSCH 112 N. East Street, Suite C Tampa, Florida 33602 Telephone: 813-229-7096 Fax: 813-229-0982 Customer Care line: 1 - 800 - 459 - 0844 www.kuppersbuschusa.com is a brand of Teka USA, Inc. ÜPPERSBUSCH...

This manual is also suitable for:

Kc 906.2

Table of Contents