Installation dimensions for the cutout ....4 Installation dimensions and depths ....5 Ventilation opening: For models EKE 604.2 and EKE 854.1 only Several cooktops side by side Electrical connection .
If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets.
“A” EKE 804.2* 1-1/8 to 2" 3-3/4" 30 to 50 mm 83 mm EKE 604.2 1-1/8 to 2" 4-1/16" EKE 854.1 30 to 50 mm 103 mm * The gap between the countertop and the front panel is not necessary for the model EKE 804.2.
Ventilation opening: For models EKE 604.2 and EKE 854.1 only If there is a KÜPPERSBUSCH built-in oven installed below the cooktop, the installation conditions for the oven will provide the cooktop ventilation, too. If there isn’t an oven installed below the cooktop, you must install a shelf there.
Installation When installing in stone countertops, the cooking surface can’t be fastened with clips. See “Special case: Installation in a stone countertop” on the right column of this page. Cutting the opening space – First, neatly cut out the countertop opening. Be sure to use the proper distances between the opening to the wall for the front, back and side! Drive in the clips...
Page 8
ÜPPERSBUSCH 112 N. East Street, Suite C Tampa, Florida 33602 Telephone: 813-229-7096 Fax: 813-229-0982 Customer Care line: 1 - 800 - 459 - 0844 www.kuppersbuschusa.com is a brand of Teka USA, Inc. ÜPPERSBUSCH...
Need help?
Do you have a question about the EKE 604.2 and is the answer not in the manual?
Questions and answers