Fazzini FM5000C User Manual page 138

ECG III OVER LOAD
ECG V OVER LOAD
ECG LL OVER LOAD
ECG LA OVER LOAD
ECG RA OVER LOAD
ECG V1 OVER LOAD
ECG V2 OVER LOAD
ECG V3 OVER LOAD
ECG V4 OVER LOAD
ECG V5 OVER LOAD
ECG V6 OVER LOAD
ECG COMM ERR
SPO2 COMM ERR
TEMP COMM ERR
NIBP COMM ERR
HR ALM LMT ERR
PVCS ALM LMT ERR
ST ALM LMT ERR
RR ALM LMT ERR
SPO2 ALM LMT ERR
NS ALM LMT ERR
NM ALM LMT ERR
ND ALM LMT ERR
PR ALM LMT ERR
TEMP1 ALM LMT ERR
ECG NOISE
HR EXCEED
PVCs EXCEED
ST EXCEED
ST1 EXCEED
ST2 EXCEED
ST3 EXCEED
ST4 EXCEED
ST5 EXCEED
ST6 EXCEED
ST7 EXCEED
RR EXCEED
SPO2 EXCEED
PR EXCEED
Low range.
Low
Low
Low
Low
Low
Low
Low
Low
Low
Low
High There is a problem with the
communication between the
High
module and the monitor.
High
High
High The alarm limit for a certain
parameter
High
accidentally changed.
High
High
High
High
High
High
High
High
High There
interference signal in ECG
signal.
High The
value is not within the
High
specified
High
range.
High
High
High
High
High
High
High
High
High
High
III-3
FM5000C - FM5000PLUS
Maternal/Fetal Monitor
and clean the patient's skin
if necessary.
Restart the monitor. If the
problem is still there, please
contact the serviceman.
Please
has been serviceman.
is too much Check if there is any
possible source of signal
noise from the area around
the cable and electrodes and
check the patient for great
motion.
measured parameter Please
serviceman.
measurement
User Manual
contact the
contact the