Siemens Reyrolle 7SR45 Argus Device Manual page 34

Device Functionality
2.6 Reset LED, Trip Flag Indication, and Binary Outputs
[sc_rstleds_bos, 1, en_US]
Figure 2-7
Reset using Reydisp Software
When the relay is latched, LEDs can be reset by sending an appropriate command over the data communica-
tion channels using Reydisp software.
In the Reydisp Evolution screen, navigate to Relay > Control and click Reset Flags.
34
Reset LEDs Outputs: Reydisp Software Input Matrix
Reyrolle, 7SR45, Device Manual
C53000-G7040-C101-2, Edition 09.2020