Advertisement
Available languages
Available languages
WORKHOLDING AND AUTOMATION
1. Safety
- The Systems-lift in the above specified execution is intended for lifting loads up to 100 kg
and shall not be used for lifting personnel.
- The Systems-lift is to be used on smooth floor surfaces and is for indoor use only!
While rolling the Systems-lift the lifting arm shall be fixed as close as possible to the vertical
support and shall be lowered to the lowest possible position. The main switch on the battery
housing shall be switched off.
Be careful when rolling over e.g. thresholds, profiled floors, hoses, cables, and when making
turns!
- When loading or unloading, always utilize the wheel brakes!
- Both front legs of the Systems-lift are on the top side equipped with sensors which will
initiate an emergency Stop when activated.
When activated the lifting/lowering is switched off and an alarm signal will sound!
- By passing over the maximal carrying load the lift switches OFF by itself and the load has
to be reduced.
- Charging of the battery shall be done on a fixed an dry position.
The Systems-lift is designed for one-shift-per-day operation and for charging over night.
The battery is charged after max. 8 hours and cannot be overloaded.
- Do not spill any liquids over the battery housing ort he controls!
- Do not use the Systems-lift while the charging cable is connected to the mains supply!
2. Technical specifications
The SAV Systems-Lift is a battery operated electric work shop rolling transporter with lifting
arm, for transporting of machine-tool-pallets.
The Systems-lift has following technical specifications:
Max. carrying force
Own weight
Total height
Total width
Total length (excl. arm)
Lifting range, vertical
Shifting range , horizontal
Max. Lifting height (Top side lifting arm) AL-2: 1930 mm
Lifting speed
Lifting capacity
Safety limit switches
Wheels
Battery type
Battery voltage
Battery capacity
Charging voltage
*) 120kg directly at the support of the lifting mast - without arm !
10
BAL 228.01
OPERATING INSTRUCTIONS
SAV Systems-Lift for effective transport of workpieces on pallets
Issue date: 07 / 2014
100 kg *)
120 kg
1990 mm
550 mm
850 mm
AL-2: 1340mm
AL-2: 420 mm
0,1 / 0,06 m/s
100 kg on 1 m=100 times
automatic in both lifting limits and at overload
front Ø 75 mm, rear Ø 125 mm with brake
Maintenance free gel battery with gas exhaust
24 VDC
17 Ah with LED-capacity indicator
110 – 240Va.c., 50-60Hz
Advertisement
