Installation; Din Rail Mounting - HMS Networks Anybus Startup Manual

®
Anybus Managed Layer 2 PoE Switch

5. Installation

5.1. DIN Rail Mounting

NOTE
Mount the switch on a DIN rail in accordance with the EN 50022 standard.
NOTE
Mount the switch at a height of ≤2 m.
Mount the switch on a DIN rail:
1. Insert the upper end of the DIN rail clip into the DIN rail.
2. Push the bottom of the DIN rail clip into the DIN rail.
Page 8 of 16
Installation
SP2978 Version 1.1