Table of Contents
Advertisement
Honeywell Analytics
Get Filter Life
0x44
This command returns the user's settings for total
filter lifetime. Lifetime is set by the user to indicate
how often the filters should be changed.
A maintenance fault will be issued when the filters
are this old. The valid range is 30 to 365 days.
Zero lifetime means a filter maintenance.
Command Packet to slave:
Command code (0x44) - 1 byte
Response from slave:
Command code (0x44) - 1 byte
CM4 date - 2 bytes
CM4 time - 2 bytes
Internal filter life - 2 bytes
External filter life - 2 bytes
Status - 1 byte (alway
26
CM4 Protocol Manual
Rev. 2.4 (3/05)
Advertisement
Table of Contents
