Table of Contents
Advertisement
Honeywell Analytics
Set Key-Code
0x52
This command allows you to reconfigure the
keypad lock-out and key code. The keypad can be
disabled, preventing unauthorized user
intervention by enabling the keypad lockout
(bit 0). This configures the keypad and a new key
code. The old key code must match the code
currently programmed into the CM4 monitor for
this command to succeed in changing the code.
Command packet to instrument:
Command Code (0x51) - 1 byte
Keypad Status - 1 byte
bit 0: Keypad lock-out function
bits 1-7: Undefined
Old Key code - 2 bytes (valid 0000-9999)
New Key code - 2 bytes (valid 0000-9999)
Response packet from instrument:
Command Code (0x51) - 1 byte
CM4 Date - 2 bytes
CM4 Time - 2 bytes
Status -1 byte
0x00 = Saved and verified
0x01 = Key code invalid
0xff = Error, not saved
32
CM4 Protocol Manual
0 = Disable
1 = Enable
Rev. 2.4 (3/05)
Advertisement
Table of Contents
