Advertisement
Instruction Manual
Vapor proof and Weather proof type LED Lighting Fittings
Thank you very much for purchasing our LED lighting fittings.
Please read this instruction manual to use the product properly.
After installing the product, be sure to hand this manual over to the user of the product.
Prior to use
1) Prior to installing the fitting, check if the product is as per your order.
2) Check for a loose or damaged part due to an accident in transit, etc.
Performance
Model
Source of light
LYWA2601101
White LED
(26W)
LYWA2602101
Installation
1) Confirm dimensions A, B, and C in the table below and install the fitting securely according to the dimensions.
NB: If the fitting is to be installed vertically, mount it with its cable side down.
2)
Use the power cable from the fitting for electric connection. The black and white wires are power wires and the green wire is a grounding wire.
NB: Connect the power and grounding wires securely and waterproof the wires.
The waterproof treatment should be adequate to prevent water penetration into the cable.
Model
Mounting Holes
12×8(4 long holes)
LYWA2601101
20×12(2 long holes)
6 holes in total
LYWA2602101
How to Use
The LED lamp is turned on by applying the rated voltage to the power cable of the product.
Maintenance
In cleaning the fitting, gently wipe with water or mild detergent. Don ' t use thinner, benzene or alkaline detergent. Such
■ Inspection
1)
chemicals might cause discoloration or deterioration in quality and strength, resulting in a damage.
2) Prior to maintenance, be sure to turn off the power.
3) Carry out maintenance properly in accordance with the related law and regulations.
4) If a repair is needed, consult us.
Input Voltage
(Frequency)
Current
0.30-0.13A
100-242V AC
(50/60Hz)
0.67-0.25A
Dimension A
714mm
1087mm
Fitting installed
- -
Input
Power
Consumption
29W
59.5-57.0W
Dimension B
Dimension C
684mm
40mm
1057mm
4-12×8 Long hole for mounting
2-20×12 Long hole for
11E0001038A11
To be conserved
LYWA
IP
rating
IP55
Advertisement
Table of Contents
Related Manuals for Seiwa LYWA2601101
Summary of Contents for Seiwa LYWA2601101
- Page 1 2) Check for a loose or damaged part due to an accident in transit, etc. Performance Input Voltage Input Power Model Source of light (Frequency) Current Consumption rating LYWA2601101 0.30-0.13A White LED 100-242V AC IP55 (26W) (50/60Hz) LYWA2602101 0.67-0.25A 59.5-57.0W Installation 1) Confirm dimensions A, B, and C in the table below and install the fitting securely according to the dimensions.
- Page 2 Disassembly and Disposal 1) Don't remove the filter (vent filter) and cable connector. 2) In the period when the product is in use, never disassemble it. 3) For disposal of the product, follow the regulations and rules of your local government. Reordering When reordering, please let us know: ・Drawing or drawing No.
- Page 3 11E0000742E11 Safety Precautions To be conserved - Prior to use, please read the safety precautions and instruction manual thoroughly to use the product properly. After installing the product, be sure to hand the safety precautions and instruction manual over to the user of the product. - Please keep the manual in a handy place for later reference.
- Page 4 For further information on the product, contact any of our offices listed below (if you like to make an inquiry, let us know the model name indicated on the product nameplate). SEIWA ELECTRIC MFG.CO., LTD. Phone +81 774 55 8181 Head Office 36 Shinike, Terada, Joyo, Kyoto Pref.
Need help?
Do you have a question about the LYWA2601101 and is the answer not in the manual?
Questions and answers