Preparation - Bosch VitaPower 8 Series Instruction Manual

en

Preparation

■ Always keep work surfaces and
chopping boards clean. Use different
chopping boards for different types of
food.
■ Maintain the cold chain. Make sure that
you only interrupt it briefly to prepare
the food, and then return the food in its
vacuum-sealed bag to the refrigerator
for storage before you cook it.
■ Food is suitable for immediate
consumption only. Once the food is
cooked, consume it immediately. Do
not store it after cooking – not even
in the refrigerator. It is not suitable for
reheating.
■ Do not cook the food in the bag you
bought it in (e.g. portions of fish). These
bags are not suitable for sous-vide
cooking.
■ Where possible, position the items of
food in the bag next to each other and
not on top of each other.
■ We recommend to keep the vacuum
seal out of the water.
For professional sous-vide cooking results
we recommend to use Bosch vacuum
drawer.
Safety systems
The appliance has various safety systems.
X "Safety systems" see page 25
Preparation
W Risk of injury
– Do not reach into the blender knife. Grip
the blade insert by the plastic only.
– Do not insert the mains plug until
all preparations for working with the
appliance are complete and the blender
jug has been correctly positioned on to
the base unit.
Warning!
When the blender is assembled, do not lift
it by the handle of the blender jug. To lift
the blender, always grip it by the base unit/
motor block.
20
X Image sequence B
1. Unwind the power cord to the required
length. .
Important: Make sure that the power cord
runs through the cable opening on the
underside of the appliance.
2. Place the base unit onto a stable and
level work surface. Open the cap
completely.
3. Turn the blender jug upside down and fit
the blade insert with the sealing ring in it
as shown.
4. Fit the lid of the blender jug onto the
blade insert.
5. Rotate the blade insert clockwise to the
stop with the help of the lid.
6. Remove the lid.
Important: The recesses on the blade
insert must be aligned with those on the
blender jug.
7. Turn the blender jug up the right way
and position on the drive as shown.
Marking pointing to
8. Rotate the blender jug clockwise to the
stop. Marking
9. Prepare the food and add to the blender
jug. Do not exceed the marking
Note: Always blend food with sufficient
liquid as this will produce a better result.
When adding ingredients liable to froth up
such as milk and dairy products, do not
exceed the marking
10. Fit the lid and press on firmly. Observe
the recess on the handle when doing so.
Note: The lid can only be fitted in this
position.
11. Close the cap and press down to the
stop.
12. Insert the mains plug.
Note: The blender can only be used if the
following conditions are met.
– The blade insert and lid must be
properly connected to the blender jug.
– The blender jug must be properly
connected to the base unit.
– The cap must be completely closed.
.
pointing to .
.
.