Creating Files; Creating Record Entries - Sony BKMW-E2000 Operation Manual

Creating Files

Use the following procedure to create file from the
data recorded on the tape.
1
Right click in an empty section of the file list and
select Create File from the popup menu which
appears. Or click the Create File & Entry button on
the toolbar
The New File window and the Entry Creation
window appear.
New File window
File Creation window
14
2
Enter the name of the new file in New File window
and click the OK button.
The New File window closes and a new file is
created. The file consists of one frame at the
current tape position.
To cancel the file creation operation, click the
Cancel button. This closes the New File window
and the Entry Creation window.
3
Use the VTR control buttons or the control bar at
the bottom of the Entry Creation window to cue up
the position that you want to make the top of the
file.
4
Click the TOP button in the Entry Creation
window.
The file top is defined.
5
In the same way, cue up the position that you want
to make the end of the file and click the END
button in the Entry Creation window.
The file end is defined.

Creating Record Entries

A record entry is a section of the tape for which a start
and end timecode pair has been defined. There must be
at least one record entry in a file (file top and file end).
Up to five record entry pairs (including the file top and
end) can be defined for a single file. When you transfer
a file containing multiple record entries, the record
entries are transferred in the order in which they are
defined in the file.
Use the following procedure to create record entries.
1
In the Entry Creation window, click the Add
button.
A record entry is created with the current tape
position as the entry top. A currently unused
number is assigned to the record entry.
2
Execute steps 3 to 5 in the "Creating Files"
procedure to set the entry top and entry end.