Registering E-Vtrs - Sony BKMW-E2000 Operation Manual

Registering E-VTRs

In the Network Device window, register an e-VTRs to
operate on by entering its name and a host name or IP
address.
The system saves registered names and host names or
IP addresses and displays them again in the Network
Device window the next time you start e-VTR
Manager.
1
Click the Add button in the Network Device
window to display the IP REGIST DATA window.
2
In the Config NAME field, enter the name of the e-
VTR. In the HOST/IP Address field, enter the host
name or an IP address. Click OK.
The newly entered name and host name or IP
address appear in the Network Device window.
If the Network Device window is not open
Select Device Register in the View menu.
You do not necessarily have to enter a name in
Config NAME field. If you do not enter a name,
the system uses the name entered as the host name
or the IP address.
9