Advertisement
Quick Links
Model 45
Wet/Dry Vacuum Cleaner
This vacuum cleaner is a high quality, precision made
product. All parts used in the manufacturing of this
vacuum cleaner have passed rigid quality control
standards prior to assembly and an "each unit" fi nal
inspection prior to packaging is your assurance of
proper assembly. This vacuum cleaner was protectively
packaged to prevent possible damage in transit. Should
damage occur, please notify the transporting carrier
immediately for loss and\or claim.
TO CONNECT THE HOSE
Insert the hose end into the tank inlet until it clicks. To
remove the hose, press the button on top of the hose
inlet, and remove hose.
TO OPERATE
The vacuum cleaner is designed to perform as a
wet/dry unit. The cloth bag is used for dry operation
only and must be removed from the tank prior to wet
pickup.
ASSEMBLY INSTRUCTIONS
Insert casters into sockets on bottom of canister. Push
casters until seated. Attach hose to coupling on front
of can.
MAINTENANCE
This vacuum cleaner contains no user serviceable
parts. If repair is needed, please take the vacuum
cleaner to an authorized Pullman-Holt factory service
center.
CAUTION
Never lubricate the vacuum cleaner motor. The
motor bearings are permanently sealed. This
vacuum is intended for indoor or outdoor use
and for wet pickup, but it is not intended to be
exposed to rain.
Operation & Care Instructions
Save For Future Reference
ABOUT THE MACHINE
(45-10P Only)
FOR DRY PICKUP
Install paper bag on inlet inside of tank.* Insert the
cloth fi lter assembly in the top of the tank. Install
motor head. The cloth fi lter located inside the can
provides highly effi cient separation of dust and dirt
particles from the incoming air stream.
CAUTION
During dry operation, never operate the vacuum
cleaner unless the cloth fi lter is in good condition
and properly asembled to the vacuum head.
FOR WET PICKUP
Remove paper bag and cloth fi lter from tank. Make
sure foam fi lter sleeve is installed on fl oat assembly.
Make sure fl oat moves freely. When the liquid level in
the tank rises to a point just below the inlet, the fl oat
assembly shuts off air fl ow, thus preventing overfl ow
and possible damage to the vacuum motor.
CAUTION: A disposable paper bag cannot be
used during liquid pick up.
CAUTION
Do not use this vacuum to pick up hazardous
materials without HEPA fi lter being installed.
(*45-10P)
Advertisement
Related Manuals for Pullman Holt 45
Summary of Contents for Pullman Holt 45
- Page 1 Operation & Care Instructions Save For Future Reference Model 45 Wet/Dry Vacuum Cleaner This vacuum cleaner is a high quality, precision made product. All parts used in the manufacturing of this vacuum cleaner have passed rigid quality control standards prior to assembly and an “each unit” fi nal inspection prior to packaging is your assurance of proper assembly.
- Page 2 IMPORTANT SAFETY GROUNDING INSTRUCTIONS INSTRUCTIONS When using an electrical appliance, basic precaution should always be This appliance must be grounded. If it should malfunction or breakdown, followed, including the following: grounding provides a path of least resistance for electric current to reduce the risk of electric shock.
- Page 3 LIMITED WARRANTY The vacuum cleaner is warrantied for 1 year from the date of purchase as In NO circumstance should you return a failed unit to the factory. If you shown on your distributor’s invoice. Parts not covered under warranty are experience any problems with your vacuum during the warranty period, power cords, fi...
- Page 4 SUPPLEMENTAL CARE AND OPERATING INSTRUCTIONS Save for future reference 45HEPA-D CAUTION: This unit is for dry pick up only. Liquid pick Filter Maintenance: up may damage the unit and invalidate your warranty. If the vacuum cleaner begins to show a loss of performance replace the paper collection bag.