Unmount The Access Point - NETGEAR WAX628 User Manual

Insight Managed WiFi 6 AX5400 Access Point Model WAX628

Unmount the access point

CAUTION: Make sure you hold the access point so that it does not drop when you
release it from the mounting plate.
To unmount the access point:
1. Find the locking latch by placing your thumb on the center of the LEDs and your
finger on the other side of the access point, directly opposite the thumb.
2. Press and hold the latch down to release the lock and keep the lock open.
3. Turn the access point counterclockwise until the access point releases from the
mounting plate.
4. Remove the access point from the mounting plate.
Mount the Access Point to a Wall
or Ceiling
263 User Manual