BenQ V37X Product Service Manual page 40

Item
High voltage level (Source)
Low voltage level (Source)
3.8.3 Signal support timing :
Resolution
480i
480p
720p
1080i
1080p
3.9 Feature :
3.9.1 Time Features :
Sleep Timer :The purpose of the sleep timer is to make the TV go to standby after a certain time set by
the user.
3.9.2 Picture Features :
(1) Picture Control
Each video input (TV, AV1, AV2,AV3, AV4, Component) has a separate set of brightness, contrast
and color but sharpness is stored by program. PC inputs have a separate set of brightness, contrast,
phase, V position, and H position.
(2) Color Saturation Control
The user is able to adjust the color saturation of the picture according to a predefined curve.
(3) Brightness and Contrast Control
The user is able to adjust the brightness and contrast of the picture according to pre-defined curve.
(4) Sharpness Control
The user is able to adjust the sharpness of the picture in 7 steps according to a pre-defined curve,
whatever the color standard. Sharpness to be stored per program. Sharpness is set to central position
by default.
(5) Color Temperature Control
The color temperature can support that neutral color temperature aligne at :
Neutral
Warm
Cool
(6) Tint
Refresh Rate (Hz) Horizontal Frequency (kHz)
60
60
60
60
60
9300 degK
7800 degK
12000 degK
40
Value
Minimum 2.0 Volts, Maximum 5.3 Volts
Minimum 0 Volts, Maximum 0.8 Volts
Pixel Rate (MHz)
15.75
31.47
45
33.75
67.5
0.283,0.297+-0.010
0.295, 0.311+-0.01
0.270,0.281+-0.01
13.51
27
74.25
74.25
148.5