BenQ V37X Product Service Manual page 32

Level
Impedance
3.3.3 Signal support timing
Lines per frame
625
625
525
625
525
3.3.4 Auto detected :
The S-Video signal should be auto-detected if a S-Video cable is plugged (S-Video has priority over CVBS).
(But in Australia Market, end users prefer to select the input source by themselves without the S-Video priority.)
3.4 RF Signal
3.4.1. Antenna Input :
This is the input for the TV antenna or cable system using the defined broadcasting standards: e.g. BG, L , I,
etc.
3.4.2. Transmission Standards
The set can receive BG, LL', I and DKK' standards. They are named as FR, UK, DK' , EURO in the UIRS.
The correspondence is as follows:
- FR = LL'
- UK = I
- DK = DKK'
- EURO = BG
3.4.3. Mono, Stereo and Multi-sound Standards
- Single sound carrier FM BG
- Single sound carrier FM I
- Single sound carrier FM DKK'
- Single sound carrier AM LL'
- Two sound carrier FM BG
- Two sound carrier FM DKK'
- NICAM BG
- NICAM L
- NICAM I
500mVrms
> 10kΩ
Horizontal frequency(KHz)
15.625
15.625
15.734
15.625
15.734
32
Vertical frequency(Hz)
50
50
60
50
60
System
PAL(B,G,H,D,I)
SECAM
PAL-M
PAL-N
NTSC