Table of Contents
Advertisement
3. RGB ADC Calibration :
(1) Setup input timing SVGA2(38.879K, 60.317Hz) & 16-Grays pattern to DSUB connector.
(2) Steup "source" to "PC".
(3) Select 16:9 format
(4) Enter factory OSD
(5) Enter the "ADC CAL...." page and run "Calibration" function
(6) Execute "Input 16 grays scale pattern for PC" to start calibration.
4. YPbPr ADC Calibration :
(1) Setup input timing
connectors.
(2) Setup "source" to "YpbPr".
(3) Select 16:9 format.
(4) Enter factory OSD.
(5) Enter the "ADC CAL...." page and run "Calibration" function.
(6) Execute "Input SMPTE 75 color bar for 480P" to start calibration.
5. AV1 RGB Calibration
(1) Use Fluke 54200 to setup PAL B/G standard and gray scale pattern.
(2) Enter factory OSD.
(3) Enter the "ADC CAL...." page and run "Calibration" function
6. Spec and Table list
(1) Reference: The variance of color coordinate via Red, Green, Blue :
Red drive ↓
Green drive ↓
Blue drive ↓
Red offset ↑
Green offset ↑
Blue offset ↑
(2) Table 1 : Color temperature spec (10~550 nits)
480P & "SMPTE Color Bar (0 IRE, 75% Color)" pattern
X
Y
x ↓
-
Y ↓
-
x ↑
Y ↑
x ↑
-
Y ↑
-
x ↓
Y ↓
106
to component
Advertisement
Table of Contents
