Assembling The Bed - Quax MILA 01 01 BD Manual

Babybed with adjustable bottom

Table of Contents

Available languages

MILA

01 01 BD

4. Assembling the bed

Step 1 : Use parts A and B, the 8 large bolts F and the hexagonal key G

Place the left legframe (A) with the openings upwards on its side on a clean and protected surface. Hold

one of the sideframes (B) in front of the provided openings and insert two bolts (F) into the openings on the

sideframe. Fasten these slightly with the hexagonal key (G). Repeat this action with the remaining side-

frame (B) Turn the construction upright and hold it in balance with the help of another person. Now place

the right legframe (A) in front of the provided openings on the sideframes and insert the remaining bolts

into the openings on the sideframes. Fasten the bolts slightly with the hexagonal key.

Step 2 : Use the parts of step 1, the mattress support C, 4 crochet hooks D and the bolts E

Insert the crochet hooks (D) in the provided openings on the legframes. Pay attention that the four of these

are on the same height of one of the possible positions for the mattress support. Insert the mattress sup-

port (C) into the bed and let it rest on the crochet hooks. Always fasten the bottom on the hooks with the

bolts (E). Now tighten all bolts.

Step 3 : Changing the position of the mattress support

Unscrew the mattress support. Replace the crochet hooks on a diﬀ erent level at the same height and re-

place the mattress support. Refasten the base with the bolts (E).

Kinderbed met verstelbare bodem

Kinderbett mit verstelbarer Boden

Lit enfant avec fond réglable

Babybed with adjustable bottom

Quax

First dreams

First steps

Table of Contents