Assembling The Bed - Quax COCOON 54F01-0100x Manual

4. Assembling the bed

Step 4.2 : Use the parts from step 4.1, both cross bars 2, four minifi x I and ten wooden dowels G.
Push fi ve wooden dowels (G) into the drillings on the outside of the cross bars (2). Push two minifi x (I) into the holes
at the bottom of the cross bars. Push the cross bars with their dowels into drillings and onto the connectors of a side
with bars, tighten the minifi x. Push the other side with its connectors into the holes and on the dowels of the cross bars.
Tighten the minifi x.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
COCOON 54F01-0100x
T 0032 9 380 80 95
23
Step 4.1 : Use both sides with
bars 4 and four connectors C
Tighten a connector (C) in the
outer drillings at the bottom of the
inside of a side with bars (4).
www.quax.eu - E E info@quax.eu