Assembling The Bed - Quax BUNK BED JOY 54 01 18 Series Manual

BUNK BED JOY

4. Assembling the bed

Stapelbed
54 01 18xx
Etagenbett
Lit superposé
Bunk bed
Step 1 - Preparation of
both long bed sides with-
out opening for the ladder
: use both sides (B), four
wooden dowels (3) and six
cylindrical nuts (2)
Push per side two wooden
dowels (3) in the provided
openings on each end. In-
sert per side three cylindri-
cal nuts (2) in the provided
openings left and right on
the innerside of the bed
sides.
Step 2 - Preparation of the
long bed side with open-
ing for the ladder : use the
bed side (C), three wooden
dowels (3) and fi ve cylindri-
cal nuts (2)
Push two wooden dowels
(3) in the provided openings
on the left end and one on
the right end of the side. In-
sert three cylindrical nuts (2)
in the provided openings left
and two right on the inner-
side of the bed side.
Step 3 - Preparation of the
long bed side without bars
: use the bed side (D), two
wooden dowels (3) and four
cylindrical nuts (2)
Push a wooden dowel (3)
in the provided openings in
the middle of the ends of
the side. Insert two cylindri-
cal nuts (2) in the provided
openings left and right on
the innerside of the bed
side.
Quax Quax
First dreams First dreams
® ®
First steps First steps
29