Assembling The Bed - Quax Stretto 54 01 35 Series Manual

STRETTO
Quax
First dreams First dreams
®
First steps First steps

5. Assembling the bed

Step 1 : Use the end-sides B, the sides A, 8 bolts 1 and four bottom supports 4
Hold the sides (A), with the bars facing inwards (see detail - the bars are not centered in the side frame) in front
of the provided openings at the top and bottom of the end-sides (B). Push the bolts (1) one by one through the
holes in the sides and tighten them, but not fully. Insert the four bottom supports (4) in one of the possible posi-
tions on the end-sides. Pay attention to having them the same height.
24
Kinderbed met verstelbare bodem
54 01 35xxxx
Kinderbett mit verstelbarer Boden
Lit enfant avec fond réglable
Babybed with adjustable bottom
Step 2 : Use the parts of steps 4.2 and
5.1, six cylindrical nuts 3 and the six
bolts 2
Turn the assembled wooden structure
on its side. Push the cylindrical nuts (3)
in the provided openings on the inner-
side of the end sides and place the metal
frame in front of the drilings. Use a mag-
netized screwdriver to fi x the screws (2)
through the holes in the chassis and into
the wooden frame.