Assembling The Bed - Quax COCOON 54F01-01XL00 Series Manual

COCOON 54F01-01XL00x

4. Assembling the bed

Step 4.1 : Use both bed rails 4, four cylindrical nuts C, fourteen wooden dowels G, both crossbars 5, four mounting plates
H, sixteen wood screws J, both low headboards 3, four wood screws I, four bolts B and the four legs K
Push two cylindrical nuts (C) into the drillings on the inside of the bed rails (4). Push four wooden dowels (G) into the
holes on the edges of the bed rails. Push three wooden dowels (G) into the holes on the side of the crossbars (5). Push
the crossbars with their wooden dowels into the drillings of the low headboards (3). Push this construction onto the
wooden dowels of the bed rails. Push the bolts (B) through the holes of the lower headboards and tighten the minifi x of
the bed rails. Turn the bed over, push the wood screws (I) into the drillings of the crossbars and tighten into the support
profi les of the bed rails. Place the mounting plates (H) on the holes of the crossbars. Push the wood screws (J) into the
drillings of the mounting plates and tighten in the crossbars. Tighten the legs (K) in the mounting plates.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T T 0032 9 380 80 95 www.quax.eu - E E info@quax.eu
29