Exposure Compensation - FujiFilm X-H2 Basic Manual

Exposure Compensation

Adjust exposure.
Rotate the rear command dial to adjust
exposure.
N •
The command dial used in this role can be chosen using D BUTTON/
DIAL SETTING > COMMAND DIAL SETTING.
•
In manual mode, exposure can be adjusted by rotating the front or
rear command dial after pressing a control to which d WHEN SET
TO B (ON/OFF SWITCH) is assigned.
O •
3
The amount of compensation available varies with the shooting mode.
•
Exposure compensation can be previewed in the shooting display,
although the display may not accurately refl ect its eff ects if:
-
the exposure compensation amount exceeds ±3 EV,
-
W 200% or X 400% is selected for DYNAMIC RANGE, or
-
STRONG or WEAK is selected for D RANGE PRIORITY.
Exposure compensation can still be previewed in the viewfi nder or LCD
monitor by pressing the shutter button halfway. In movie mode, the
display may not accurately refl ect the eff ects of exposure compensa-
tion during F-log recording or when W 200% or X 400% is selected
for DYNAMIC RANGE. An accurate preview can be obtained by select-
ing mode M and adjusting exposure directly.
86