Press the shutter button all the way down.
2
•
The shutter will remain open for up to 60 minutes while the
shutter button is pressed.
•
The display shows the time elapsed since the exposure
started.
•
Releasing the shutter button closes the shutter, ending the
exposure. Processing will begin, and the camera will display
the processing time remaining.
O
Bulb photography is not available in drive modes other than STILL
IMAGE or when the electronic shutter is selected for A SHOOTING
SETTING > SHUTTER TYPE.
N •
Selecting an aperture of A fi xes shutter speed at 30 s.
•
To reduce "noise" (mottling) in long time-exposures, select ON for
H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that
3
this may increase the time needed to record images after shooting.
Using a Remote Release
A remote release can be used for long time-ex-
posures. When using an optional RR-100 re-
mote release or an electronic release from
third-party suppliers, connect it to the camera's
remote release connector.
62