Exposure Compensation - FujiFilm X-S20 Owner's Manual

Exposure Compensation

Adjust exposure.
Rotate the rear command dial to adjust
exposure.
N •
The command dial used in this role can be chosen using D BUTTON/
DIAL SETTING > COMMAND DIAL SETTING.
•
If assigned DEFAULT (d WHEN SET TO B), the function dial can be
used to adjust exposure when auto ISO sensitivity control is enabled
in manual mode. Exposure can also be adjusted by rotating the front
or rear command dial after pressing a control to which d WHEN SET
TO B (ON/OFF SWITCH) is assigned.
O •
The amount of compensation available varies with the shooting mode.
•
Exposure compensation can be previewed in the shooting display,
although the display may not accurately refl ect its eff ects if:
-
the exposure compensation amount exceeds ±3 EV,
-
W 200% or X 400% is selected for DYNAMIC RANGE, or
-
STRONG or WEAK is selected for D RANGE PRIORITY.
Exposure compensation can still be previewed in the viewfi nder or LCD
monitor by pressing the shutter button halfway. In movie mode, the
display may not accurately refl ect the eff ects of exposure compensa-
tion during F-log recording or when W 200% or X 400% is select-
ed for F DYNAMIC RANGE. An accurate preview can be obtained by
selecting mode M and adjusting exposure directly.
5
107