Receipt Of Radioactive Material - QSA Global SENTINEL SENTRY 330 Manual

If the package fails any of the inspections described, remove the container from use until it can be
brought into compliance with the Type B(U) certificate.

5.2 Receipt of Radioactive Material

a. A radioactive material package must be accepted from the carrier at the time it is delivered.
[10CFR20.1906(a)(1)]
b. If a radioactive material package is to be held at the carrier's terminal for pickup, arrangements must
be made to receive notification from the carrier of the arrival of the package at the time of arrival. The
package must be picked up expeditiously upon receipt of notification (within three hours if
practicable). [10CFR20.1906(c)]
c. Monitoring as described below must be performed as soon as practicable but at least within three
hours if received during normal working hours or within three hours of the next work day if received
after normal working hours. [10CFR20.1906]

Upon receipt of a package of radioactive material, the package shall be placed in a restricted
area. Assure appropriate personnel are notified.

Survey the entire exterior surface of the package at the time of receipt and assure that the
maximum radiation level does not exceed 2 mSv/hr (200 mRem/hr). Survey all sides of the device
at 1m from the exterior surfaces of the packages and assure that the maximum radiation level
does not exceed 0.1 mSv/hr (10 mRem/hr). If either of these limits are exceeded, notify the
Radiation Safety Officer immediately. Record the maximum radiation levels measured at the
package surface and at 1m from the package surface on the Receiving Report.
[10CFR20.1906(d), 10CFR71.47]
Note: If any of these limits are exceeded, the Radiation Safety Officer must immediately notify
the USNRC (or applicable governing agency) and the final delivering carrier.
d. Inspect the package for any evidence of physical damage. Record the results of this inspection on the
Receiving Report. Also record on the Receiving Report the date, source model number, source serial
number, radionuclide, activity, the individuals name making the record, transport package model
number, mass or activity of the depleted uranium and the package serial number. [10CFR34.63]
e. Assure that the package is locked or place the package into an outer locked container and secure the
package in accordance with your license requirements. [10CFR34.35, 10CFR34.23]
f. Keep a copy of the Operating Manual for the package on file to assure you have the proper opening
and handling instructions. Assure that the instructions are followed and any noted special precautions
are performed. [10CFR20.1906(e)]
Note: For licensees transporting special form sources in licensee owned or operated vehicles to
and from a work site are exempt from the contamination monitoring requirements. The
radiation survey required upon receipt must still be performed. [10CFR20.1906(f)]
QSA Global, Inc.  40 North Avenue Burlington, MA 01803
Operations Manual  MAN-038 March 2019
 888.272.2242  781.272.2000
 Page 81 of 100
 qsa-global.com