Warranty And Limitation Of Liability - QSA Global SENTINEL SENTRY 330 Manual

1.8 Warranty and Limitation of Liability

QSA Global, Inc. (herein referred to as the manufacturer) warrants its product which it manufactures and
sells to be free from defects in material and workmanship for a period of one year from the date of
shipment. This warranty shall not apply to any product or parts which have been subjected to misuse,
improper installation, repair, alteration, neglect, accident, abnormal conditions of operation, or use in any
manner contrary to instructions.
The manufacturer's liability under such warranty shall be limited to replacing or repairing, at its option, any
parts found to be defective in such respects, which are returned to the manufacturer, transportation
prepaid; or at its option, to returning the purchase price thereof.
The warranty on other manufacturer's components shall be that of the original manufacturer whose
warranty shall be binding.
In no event shall the manufacturer be liable for any incidental or consequential damages, whether or not
such damages are alleged to have resulted from the use of such product in accordance with instructions
given by or referred to by the manufacturer.
QSA Global, Inc. assumes no liability or responsibility for the usage of any radioactive material or device
generating penetrating radiation used in connection with this product. The use of such material or
generators in any manner other than prescribed in the U.S. Nuclear Regulatory Commission, equivalent
Agreement State, International Licensing Authority, or permitted by any regulation of the U.S. Nuclear
Regulatory Commission, Agreement State, or International Regulatory regulations may constitute a
violation of such license terms.
All other warranties, except those warranties expressly stated herein, including without limitation
warranties of, merchantability and implied warranties of fitness, are expressly excluded.
The warranty on this device is specifically limited to its use only with sealed sources and connectors,
parts, and accessories manufactured by QSA Global, Inc.
QSA Global, Inc. has obtained equipment and transport package approvals for the SENTINEL SENTRY
110 and SENTINEL SENTRY 330 from the Commonwealth of Massachusetts, the USNRC Transportation
Branch, the U.S. Department of Transportation, and the Canadian Nuclear Safety Commission and in
ADR approved countries. In Canada, the radiography equipment approvals require use of approved
remote controls, control cables, projection sheaths, sealed source assemblies, and remote control cranks
in conjunction with the SENTINEL SENTRY 110 or SENTINEL SENTRY 330 gamma-ray source
projectors. For additional information on compliance with and/or status of Type B(U) certifications,
USNRC 10CFR34, ANSI N432-1980 or ISO 3999:2004(E) please contact QSA Global, Inc.
QSA Global, Inc. shall not be liable for any errors or omissions contained herein and the provision by
QSA Global, Inc. of the information set out in this manual does not in itself constitute acceptance of any
liability on the part of QSA Global, Inc.
QSA Global, Inc.  40 North Avenue Burlington, MA 01803  888.272.2242  781.272.2000  qsa-global.com
Operations Manual  MAN-038 March 2019  Page 14 of 100