Unpacking and setting up
2.4
Please note the following points:
What should I watch out for when loading paper?
To avoid paper misfeeds in the laser printer, please observe the following points:
Do not use any paper with the following features:
l
Paper that has already been used in a thermal or ink-jet printer.
m
Folded or wavy paper.
m
Paper with a surface that is too smooth, too rough or irregular.
m
Specially coated paper such as carbon paper or paper with an adhesive surface.
m
Paper that is not cut at right angles.
m
Paper that is held together by glue, adhesive or clips.
m
Paper with labels that detach easily.
m
Warped or curled-up postcards.
m
Note:
When paper is loaded, the orientation is based on the format marks in the paper source
units.
What should I watch out for when loading envelopes?
To avoid envelope misfeeds in the laser printer, please observe the following points:
Do not use self-adhesive envelopes or those with a tear-off strip, closures or a window.
l
Place the envelopes in the tray horizontally.
l
Place the envelopes in the tray with the flap down so that the upper surface of the envelopes
l
is lying against the side of the tray with the feed roller.
Load envelopes of format B5 with the flap facing down and pointing to the rear of the tray.
l
Make certain that the flaps are neatly folded back.
l
Test the envelopes before buying large quantities!
Some types of envelopes crease easily when they are run through a printer. Test a type of
envelope before purchasing large quantities.
2
2-10