Axis Q1715 User Manual page 16

AXIS Q1715 Block Camera
Configure your device
7. The camera doesn't have it's own email server, so it will need to log into another email server to be able to send mails. Fill
in the rest of the information according to your email provider.
8. To send a test email, click Test.
9. Click Save.
Create a rule
10. Go to System > Events > Rules and add a rule.
11. Type a name for the rule.
12. In the list of conditions, under I/O, select Digital input.
13. In the list of ports, select Port 1.
14. In the list of actions, under Notifications, select Send notification to email.
15. Select a recipient from the list or go to Recipients to create a new recipient.
To create a new recipient, click
16. Type a subject and a message for the email.
17. Click Save.
Detect tampering with input signal
This example explains how to send an email when the input signal is cut or short-circuited. For more information about the
I/O connector, see page 31.
1. Go to System > Accessories and turn on Supervised for the relevant port.
Add an email recipient:
1. Go to System > Events > Recipients and add a recipient.
2. Type a name for the recipient.
3. Select Email.
4. Type an email address to send the email to.
5. The camera doesn't have it's own email server, so it has to log into another email server to send mails. Fill in the rest of the
information according to your email provider.
6. To send a test email, click Test.
7. Click Save.
Create a rule:
1. Go to System > Events > Rules and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under I/O, select Supervised input tampering is active.
4. Select the relevant port.
5. In the list of actions, under Notifications, select Send notification to email and then select the recipient from the list.
6. Type a subject and a message for the email.
. To copy an existing recipient, click
16
.