Axis Q1715 User Manual page 13

AXIS Q1715 Block Camera
Configure your device
Record video when the camera detects an object
This example explains how to set up the camera to start recording to the SD card five seconds before it detects an object and to
stop one minute after.
1. Start the application if it is not already running.
2. Make sure you have set up the application according to your needs.
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of actions, under Recordings, select Record video while the rule is active.
4. In the list of storage options, select SD_DISK.
5. Select a camera and a stream profile.
6. Set the prebuffer time to 5 seconds.
7. Set the postbuffer time to 1 minute.
8. Click Save.
Show a text overlay in the video stream when the device detects an object
This example explains how to display the text "Motion detected" when the device detects an object.
1. Start the application if it is not already running.
2. Make sure you have set up the application according to your needs.
Add the overlay text:
1. Go to Video > Overlays.
2. Under Overlays, select Text and click
3. Enter #D in the text field.
4. Choose text size and appearance.
5. To position the text overlay, click
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of actions, under Overlay text, select Use overlay text.
4. Select a video channel.
5. In Text, type "Motion detected".
6. Set the duration.
7. Click Save.
.
and select an option.
13