Advanced Setup Page - PCchips P51G Series User Manual

Motherboard User's Guide

Advanced Setup Page

This page sets up more advanced information about your system. Handle this
page with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Thermal Management
TM Status
Limit CPUID MaxVal
Intel XD Bit
Quick Power on Self Test
Bootup NumLock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Removable Drives
Try Other Boot Device
: Move Enter: Select +/-/: Value
F1: General Help
Thermal Management
This item displays CPU's temperature and enables you to set a safe temperature
to Prescott CPU.
• TM Status (TM1): This item displays CPU Monitor status.
Limit CPUID MaxVal
This item can support Prescott CPUs for old OS. Users please note that under
NT 4.0, it must be set "Enabled", while under WinXP, it must be set "Disabled"
Intel XD Bit
This item allows users to enable or disable the Intel XD bit
Quick Power on Self Test
Enable this item to shorten the power on testing (POST) and have your system
start up faster. You might like to enable this item after you are confident that
your system hardware is operating smoothly.
Boot Up NumLock Status
This item set the Num-Lock key to be on or off after bootup.
APIC Mode
This item allows you to enable or disable the APIC (Advanced Programmable
Interrupt Controller) mode. APCI provides symmetric multi-procesing (SMP)
for systems, allowing support for up to 60 processors.
1st Boot Device/2nd Boot Device/3rd Boot Device
Use these items to determine the device order the computer uses to look for an
operating system to load at start-up time.
Advanced Setup
Enabled
TM1
For the processor its
Disabled
CPUID belows 0F41h.
Disabled
TM2 only can be enable
Enabled
under below setting.
On
1. Freq. >=3.6GHz FSB800
Enabled
2. Freq. >=2.8GHz FSB533
Hard Drive
Removable Dev.
CD/DVD
Press Enter
Yes
F10: Save Esc: Exit
F9: Optimized Defaults
.
20
Help Item