Advertisement
www.malmsten.com
2.6 Attaching the reinforcement pipe
Use hex socket cap screws (25) and M8 nuts (28) to connect the reinforcement pipes described as 7 and 8.
Now you may connect the pre-assembled pipe to the
bottom frame using M8 square nut (27) and hex socket cap
screw M8x40 (22) – 2 pcs. that is previously placed in the
profile's groove.
Loctite can be used to permanently lock the bolts in its position.
Malmsten AB • www.malmsten.com
+46 44 28 71 00 • info@malmsten.com
Art. No. 1511026
Advertisement
