Related Manuals for Malmsten MULTI PRO Junior
Summary of Contents for Malmsten MULTI PRO Junior
- Page 1 Art. No. 1511026 Water Polo Goal MULTI PRO Junior 2.5 m (1511026) Assembly Instructions Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 2 Crossbar Bottom Left side frame Crossbar Aluminum Right pipe right Bottom Aluminum rear frame pipe right Left Bottom Net hanger 2 rear frame Right Goal’s 10. Aluminum posts connector Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
- Page 3 M8 nut screw M8x16 19. Hex socket 29. Rivet nut cap screw (already M8x60 installed in the profile) 20. Hex socket 30. White cap screw plastic M8x100 washer Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
- Page 4 Important when using Loctite: We ask you to please observe that Loctite should only be used on the bolts high- lighted in yellow in this document, and Loctite should never be applied to the bolts highlighted in red. Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
- Page 5 Hex socket button cap screw (18) – 8 pcs Enlarged washer (32) – 2 pcs Hex socket cap screw M8x12 (23) – 2 pcs Loctite can be used to permanently lock the bolts in its position. Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
- Page 6 Distance plate (14) – 2 pcs Hex socket cap screw with low head (21) – 4 pcs Loctite can be used to permanently lock the bolts in its position. Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
- Page 7 Put the 80x40 mm plastic plug into the profile. DIN 985 M8 nut (28) – 2 pcs Loctite can be used to permanently lock the bolts in its position. Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
- Page 8 M8 square nut (27) and hex socket cap screw M8x40 (22) – 2 pcs. that is previously placed in the profile’s groove. Loctite can be used to permanently lock the bolts in its position. Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
- Page 9 Hex socket button cap screw M8x55 (24) – 4 pcs DIN 934 M8 nut (26) – 8 pcs Eyelet screw (35) – 4 pcs Black plastic washer (36) – 8 pcs Do not use Loctite on the bolts. Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
- Page 10 • Attach the ”Omega” hooks into the goal frame according to the drawing • In the back the ”Omega” hooks attach underneath • Insert ”Omega” hook into goal frame • Turn 90 degrees Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
- Page 11 Usage in the pool; the goal shall be secured in position by 4 goal lines. In storage; ensure safe locked storage. THIS IS NOT A TOY ! Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...
-
Page 12: Terms Of Warranty
IV. TERMS OF WARRANTY General Provisions 1.1 M. MALMSTEN AB (the “Manufacturer”) provides the limited warranty (the “Warranty”) to the purchaser of the Equipment. Warranty is only valid in the facility in which the Equipment was originally installed. The Warranty is valid from the time of the final acceptance of the building or from the date of delivery and to the timeline listed below, under the terms and conditions stated below. -
Page 13: Location Of The Serial Number
The serial number consists of XX/YYYY/ZZZZZ where: XX – calendar week of manufacturing YYYY – year of manufacturing ZZZZZ – serial number Removing the sticker will void the warranty. Sample view: Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com... - Page 14 (Art.No. 1514036) Extentions to make the goal follow the FINA regulations of 108cm between the goal lane lines (Art.No. 1514037) Wheels + Exten- sions (Art.No. 1514036 + 1514037) Malmsten AB • www.malmsten.com +46 44 28 71 00 • info@malmsten.com...