Related Manuals for Malmsten MULTI PRO
Summary of Contents for Malmsten MULTI PRO
- Page 1 Art. No. 1511025 Water Polo Goal MULTI PRO (1511025) Assembly Instructions Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 2 Steel toe work boots Working gloves Crossbar Bottom Left side frame Crossbar Aluminum Right pipe right Bottom Aluminum rear frame pipe right Left Bottom Net hanger 2 rear frame Right Goal’s 10. Aluminum posts connector Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 3 18. Hex socket 28. DIN 985 button cap M8 nut screw M8x16 19. Hex socket 29. Rivet nut cap screw (already M8x60 installed in the profile) 20. Hex socket 30. White cap screw plastic M8x100 washer Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 4 Important when using Loctite: We ask you to please observe that Loctite should only be used on the bolts high- lighted in yellow in this document, and Loctite should never be applied to the bolts highlighted in red. Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 5 Hex socket button cap screw (18) – 8 pcs Enlarged washer (32) – 2 pcs Hex socket cap screw M8x12 (23) – 2 pcs Loctite can be used to permanently lock the bolts in its position. Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 6 M8 square nut (27) – 4 pcs Distance plate (14) – 2 pcs Hex socket cap screw with low head (21) – 4 pcs Loctite can be used to permanently lock the bolts in its position. Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 7 DIN 125 A8,4 washer (31) – 2 pcs Put the 80x40 mm plastic plug into the profile. DIN 985 M8 nut (28) – 2 pcs Loctite can be used to permanently lock the bolts in its position. Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 8 M8 square nut (27) and hex socket cap screw M8x40 (22) – 2 pcs. that is previously placed in the profile’s groove. Loctite can be used to permanently lock the bolts in its position. Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 9 Hex socket button cap screw M8x55 (24) – 4 pcs DIN 934 M8 nut (26) – 8 pcs Eyelet screw (35) – 4 pcs Black plastic washer (36) – 8 pcs Do not use Loctite on the bolts. Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 10 • Place the net over the net hangers • Attach the ”Omega” hooks into the goal frame according to the drawing • In the back the ”Omega” hooks attach underneath • Insert ”Omega” hook into goal frame • Turn 90 degrees Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 11 Usage in the pool; the goal shall be secured in position by 4 goal lines. In storage; ensure safe locked storage. THIS IS NOT A TOY ! Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 12 IV. TERMS OF WARRANTY General Provisions 1.1 M. MALMSTEN AB (the “Manufacturer”) provides the limited warranty (the “Warranty”) to the purchaser of the Equipment. Warranty is only valid in the facility in which the Equipment was originally installed. The Warranty is valid from the time of the final acceptance of the building or from the date of delivery and to the timeline listed below, under the terms and conditions stated below.
- Page 13 LOCATION OF THE SERIAL NUMBER: The serial number consists of XX/YYYY/ZZZZZ where: XX – calendar week of manufacturing YYYY – year of manufacturing ZZZZZ – serial number Removing the sticker will void the warranty. Sample view: Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...
- Page 14 Wheels for ease of transport to and from storage (Art.No. 1514036) Extentions to make the goal follow the FINA regulations of 108cm between the goal lane lines (Art.No. 1514037) Wheels + Exten- sions (Art.No. 1514036 + 1514037) Malmsten Inc • www.malmsten.com/en-US sales@malmsten.com...