Selecting A Message Window Language - Konica Minolta Magicolor 2350 EN Installation Manual

Number Key
4
5
6
7
8

Selecting a Message Window Language

When you receive your printer, the message window language is set to
English. However, status messages and configuration menus can be
displayed in the message window in English, French, Spanish, German,
Italian, Czech, or Portuguese.
Selecting a language in the control panel also localizes default media size
selections.
If you want to change the message window language, use the following
control panel sequence:
Press Key
20
Function
Initially enters the menu system
Moves down in the menu structure
Selects the displayed menu choice (no matter
what position the cursor is in)
Moves up in the menu structure
In menu choices with character-by-character
selections, scrolls upward through the available
characters
Moves right in the menu structure
Moves right through the scrollable menu choice
selections when selections are whole words,
not characters
Starts the toner replacement sequence, if toner
is out
Moves down in the menu structure
In menu choices with character-by-character
selections, scrolls downward through the
available characters
Moves left in the menu structure
Moves left through the scrollable menu choice
selections when selections are whole words,
not characters
Scrolls through messages
(Until) Display Reads
MAGICOLOR 2350
IDLE
About the Control Panel