Table of Contents
Advertisement
Setting
Setting
D
Sync
E
Zoom
F
Lighting
G
LED light
G
Number of fl ashes
H
*
Frequency
* Full value may not be applied if limits of fl ash control system are exceeded.
11
324
Control fl ash timing.
•
H (1ST CURTAIN): The fl ash fi res immediately after the shut-
ter opens (generally the best choice).
•
I (2ND CURTAIN): The fl ash fi res immediately before the
shutter closes.
•
R (AUTO FP(HSS)): High-speed sync (compatible units only).
The camera automatically engages front-curtain high-
speed sync at shutter speeds faster than the fl ash sync
speed. Equivalent to 1ST CURTAIN when MULTI is selected
for fl ash control mode.
The angle of illumination (fl ash coverage) for units that sup-
port fl ash zoom. Some units allow the adjustment to be
made from the camera. If AUTO is selected, zoom will auto-
matically be adjusted to match coverage to lens focal length.
If the unit supports this feature, choose from:
•
J (FLASH POWER PRIORITY): Gain range by slightly reducing
coverage.
•
K (STANDARD): Match coverage to picture angle.
•
L (EVEN COVERAGE PRIORITY): Slightly increase coverage for
more even lighting.
Choose how the built-in LED light functions during still photog-
raphy (compatible units only): as a catchlight (M/CATCHLIGHT),
as an AF-assist illuminator (N/AF ASSIST), or as both a catch-
light and an AF-assist illuminator (O/AF ASSIST+CATCHLIGHT).
Choose OFF to disable the LED during photography.
Choose the number of times the fl ash fi res each time the
*
shutter is released in MULTI mode.
Choose the frequency at which the fl ash fi res in MULTI mode.
Description
Description
Advertisement
Table of Contents
