Table of Contents
Advertisement
16. Attach the motor support rear clamp.
17. Adjust the motor support bracket so that the motor assem-
bly is level and tighten down.
18. Attach the motor wiring cover.
AFTER MAINTENANCE ACTIONS
Reconnect the incoming water (if disconnected) and
turn on. Then restore power to the unit. Run the unit for at
least 10 minutes to ensure there are no leaks. If you hear any
grinding sounds while the motor is running, immediately shut
off the unit and secure power and water. There is a serious
problem that must be addressed. If any problems arise you
can contact Jackson Technical Service.
SECTION 5: SERVICE PROCEDURES
REPLACING CONVEYOR MOTOR
AJ-54C Series Technical Manual 7610-002-30-91
Issued: 03-22-2006 Revised: N/A
63
SPECIAL PARTS
Bracket, Motor Support
05700-021-73-42
Clamp, Motor Support
04730-002-32-15
CONTACT INFORMATION
Jackson MSC Inc. provides technical support for all
of the dishmachines detailed in this manual. We strongly rec-
ommend that you refer to this manual before making a call to
our technical support staff. Please have this manual with you
when you call so that our staff can refer you, if necessary, to
the proper page. Technical support is available from 8:00 a.m.
to 5:00 p.m. (EST), Monday through Friday. Technical support
is not available on holidays. Contact technical support toll free
at 1-888-800-5672. Please remember that technical support is
available for service personnel only.
Advertisement
Table of Contents
