Table of Contents
Advertisement
the unit. Turn the unit on and allow it to fill normally.
18. Verify that there are no leaks around the heater. If there
are, attempt to tighten it down as the tub will change shape
slightly as it heats up.
19. Use the amp meter to take readings off of the power lines
to the heater, verifying the amperage draw to the machine
data plate.
20. Wait until the heater contactor kicks out (meaning that the
tub has reached the appropriate temperature) and place the
unit in DELIME mode by flipping the switch on the back of the
control box. Allow the unit to operate for at least ten minutes
to verify that there are no leaks and that the heater is main-
taining the tank temperature.
21. If the unit appears to be operating correctly, return it to
AUTO mode and turn off.
22. Replace the heater box cover.
23. Replace the front dress panel.
AFTER MAINTENANCE ACTIONS
Service personnel may want to drain the machine
and allow it to cool down. Secure power to the unit at the ser-
vice breaker and then verify the torque of all fasteners covered
in this instruction.
SPECIAL NOTES
Work performed on Jackson dishmachines by unau-
thorized or unqualified personnel may void the warranty.
Before beginning this or any other maintenance evolution on a
unit under warranty, you should contact a certified Jackson
technician or Jackson Technical Service. You can find a list of
qualified service agencies in the back of you unit's installation
manual.
SECTION 5: SERVICE PROCEDURES
REPLACING THE WASH HEATER (CONTINUED)
AJ-54C Series Technical Manual 7610-002-30-91
Issued: 03-22-2006 Revised: N/A
60
SPECIAL PARTS
Heater Replacement Kit Chart
Model
Volts
Phase
KW
ALL
208
1
10
230
1
10
200
3
10
208
3
10
230
3
10
460
3
10
575
3
10
600
3
10
CONTACT INFORMATION
Jackson MSC Inc. provides technical support for all
of the dishmachines detailed in this manual. We strongly rec-
ommend that you refer to this manual before making a call to
our technical support staff. Please have this manual with you
when you call so that our staff can refer you, if necessary, to
the proper page. Technical support is available from 8:00 a.m.
to 5:00 p.m. (EST), Monday through Friday. Technical support
is not available on holidays. Contact technical support toll free
at 1-888-800-5672. Please remember that technical support is
available for service personnel only.
Part Number
06401-003-12-94
06401-003-12-95
06401-003-12-94
06401-003-12-94
06401-003-12-95
06401-003-12-96
06401-003-12-97
06401-003-12-97
Advertisement
Table of Contents
