Table of Contents
Advertisement
SIDE LOADER PAWL BAR ASSEMBLIES/PAWL BAR BRACKET/MAGNET
Replacement Kit Note:
The replacement kits for the drive linkages come also
with the hardware for mounting them to the pawl bars.
Service Note:
The cord for the conveyor switch needs to
be cut to length in the field and have the
pink terminal applied there.
SECTION 6: PARTS SECTION
Pawl Bar Spacer
05700-011-71-45
Drive Linkage Replacement Kit (L-R)
06401-003-11-59
Replacement Kit Note:
The conveyor switch replacement
kit comes with the switch, a termi-
nal and a wire nut.
AJ-54C Series Technical Manual 7610-002-30-91
Issued: 03-22-2006 Revised: N/A
Replacement Kit Note:
The kits for the pawl bars come with the bar
weldment, (3) dogs and the hardware.
Pawl Dog Wing Weldment
05700-021-86-79
Kit, Pawl Bar Replacement: 06401-131-86-90
Kit, 30" Pawl Bar Replacement: 06401-231-86-90
Drive Linkage Replacement (R-L)
Pawl Bar Roller Bracket
05700-031-77-94
117
06401-003-11-60
See page entitled "Pawl Bar
Miscellaneous Components"
for other parts used on the
Side Loader.
Advertisement
Table of Contents
