Table of Contents
Advertisement
Audio
This is the setting screen for the HDMI terminal, SDI
terminal and streaming audio.
After configuring the items, press the [Submit＆
Reboot] or [Submit] button.
The settings will be applied when the camera is
next restarted.
Audio Settings
9 Audio Switch
Configuring this item to "on" enables audio input
from the LINE IN terminal (LINE IN) or the built-in
microphone (MIC).
[Setting Values: Ron, off]
Memo :
This setting remains valid when the camera is
0
connected to a PC via USB.
9 Sample Rate
For configuring the sampling rate.
Fixed at "48K".
9 Bit Rate
For configuring the bitrate.
[Setting Values: R96K, 128K]
9 Input Type
For setting the audio input method.
[Setting values: RLINE IN, MIC]
9 Input Vol
For configuring the volume of the audio input.
[Setting Values: 0 dB to 59 dB (R20 dB)]
9 ADTS Options
For configuring the ADTS option.
[Setting Values: on, Roff]
34
Audio
System
For restarting the system and management of
users.
Initialize
9 Reboot
Restarts the camera. Use this function to apply new
video or audio settings.
User
9 UserName
User name for accessing the camera from the web
browser.
Fixed at "jvc".
9 Passwd
For configuring the password for accessing the
camera from a web browser.
Memo :
The password cannot be configured to the
0
default password value (0000).
Restore Default
After initializing the settings, all settings such as the
IP address will be restored to the factory default
settings. After the initialization, it is necessary to
close the browser and reconnect.
Advertisement
Table of Contents
