Image; Audio - JVC KY-PZ400 Series Instructions Manual

Image

For adjusting the video quality.
After configuring the different items, press the
[Submit] button.
Memo :
If the camera is restarted without pressing the
0
[Submit] button, the settings will be restored to
those before the change.
Pressing the [Default] buttons restores the
settings to the factory default.
To display the menu on the camera's video
0
image, configure [Encode Codec] of [First
stream] or [Second stream] to "H.264". If the
menu display is too small, increase the
[Resolution] for [First stream] or [Second
stream] accordingly.
Brightness
For adjusting the brightness.
[Setting Values: 0 to 14 (R7)]
Saturation
For adjusting the saturation.
[Setting Values: 0 to 14 (R4)]
Contrast
For adjusting the contrast.
[Setting Values: 0 to 14 (R7)]
Sharpness
For adjusting the sharpness.
[Setting Values: 0 to 11 (R6)]
Hue
For adjusting the hue.
[Setting Values: 0 to 14 (R7)]
Flip
Flips the image vertically.
[Setting Values: on, Roff]
Mirror
Flips the image horizontally.
[Setting Values: on, Roff]

Audio

This is the setting screen for the HDMI terminal, SDI
terminal and streaming audio.
After configuring the different items, press the
[Submit] button.
The settings will be applied when the camera is
next restarted.
Audio Settings
9 Audio Switch
Configuring to "on" enables audio input from the
LINE IN terminal.
[Setting Values: Ron, off]
Memo :
This setting remains valid when the camera is
0
connected to a PC via USB. U S
9 Audio Type
Fixed at AAC.
9 Sample Rate
For configuring the sampling rate.
[Setting Values: 44.1K, R48K]
9 Bit Rate
For configuring the bitrate.
[Setting Values: R96K, 128K]
9 Input Type
Fixed at "LINE IN".
9 Input Vol
For configuring the volume of the audio input.
[Setting Values: 1 dB to 59 dB (R20 dB)]
9 ADTS Options
For configuring the ADTS option.
[Setting Values: on, Roff]
29
Image