Table of Contents
Advertisement
Auto-Tracking
The Auto-tracking function enables the camera to
automatically pan, tilt, and zoom so that the
specified person is always displayed in the center
of the screen.
Only One Person in the Camera Image
1 Press the F3 button on the remote control
to start tracking.
Adjust the angle and zoom so that the person
you want to track is in the center of the camera
image.
If there is only one person in the camera image,
press the F3 button on the remote control to lock
the target and start tracking.
When the tracking target cannot be detected,
the camera will stop at that position and
automatically resume tracking when the
tracking target appears again.
Memo :
During Auto-Tracking, the Auto-Tracking
0
function may not work depending on the
conditions of surrounding and people.
During Auto-Tracking, the following operations
0
are not allowed.
Pan, tilt, zoom, moving to the Preset, manual
focus and displaying the menu
2 Press the F4 button on the remote control
to stop tracking.
50
Auto-Tracking
Multiple People in the Camera Image
1 Press the F3 button on the remote control
and select the target using the left and right
buttons.
If there are multiple people in the camera image
when the F3 button on the remote control is
pressed, a green frame for selecting the
tracking target is displayed.
Use the left and right buttons on the remote
control to move the cursor to the person to be
tracked.
Detection Frame (Green)
.
2 Press the [HOME] button on the remote
control to start tracking.
Pressing the [HOME] button on the remote
control hides the frame and starts the tracking.
To change the target to be tracked, do so using
the left and right buttons on the remote control.
When the tracking target cannot be detected,
the camera will stop at that position and
automatically resume tracking when the
tracking target appears again.
Memo :
During Auto-Tracking, the Auto-Tracking
0
function may not work depending on the
conditions of surrounding and people.
During Auto-Tracking, the following operations
0
are not allowed.
Pan, tilt, zoom, moving to the Preset, manual
focus and displaying the menu
3 Press the F4 button on the remote control
to stop tracking.
Advertisement
Table of Contents
